Oct 8 2009
ARM [(LSE:ARM); (Nasdaq:ARMH)] announced at the IEEE SOI Conference, Foster City, Calif., the results from a silicon-on-insulator (SOI) 45nm test chip that demonstrate potential power savings of up to 40 percent over traditional bulk process for manufacturing chips. The test chip was based on an ARM 1176™ processor and enables a direct comparison between SOI and bulk microprocessor implementations. The results confirm SOI technology is a viable alternative to traditional bulk process technology when designing low-power processors for high-performance consumer devices and mobile applications.
ARM® and Soitec collaborated to produce a test chip to demonstrate the power savings in a real silicon implementation with a well-known, industry-standard core. The goal was to produce a comparison of 45nm SOI high-performance technology with bulk CMOS 45nm low-power (LP) technology of the same product.
“As a technology leader in physical IP and processors, ARM has been an active proponent of the benefits SOI may bring to our customers’ products,” said Tom Lantzsch, vice president, physical IP division, ARM. “Investing the resources to conduct a bulk vs. SOI comparison provides useful data to address previously speculated claims and demonstrates that there can be performance and power savings benefits from SOI.”
The silicon results show that 45nm high-performance SOI technology can provide up to 40 percent power savings and a 7 percent circuit area reduction compared to bulk CMOS low-power technology, operating at the same speed. This same implementation also demonstrated 20 percent higher operating frequency capability over bulk while saving 30 percent in total power in specific test applications.
“This benchmark by ARM and Soitec clearly demonstrates the potential power/performance benefits of our sixth-generation 45nm SOI technology now available to both ASIC and foundry clients,” said Mark Ireland, vice president, Semiconductor Products & Services, IBM. “Validating the power advantage of SOI with an industry-standard ARM processor demonstrates the possibilities for SOI adoption in the digital consumer electronic segment.”
“This is a significant step for the industry, as the collaborative efforts of SOI Consortium member companies have produced a proof-point that the energy efficiency of SOI technology could cover battery operated applications,” said Horacio Mendez, executive director of the SOI Industry Consortium. “Many companies will benefit from this data in considering their technology manufacturing decision.”
The design was implemented using ARM and IBM standard SOI libraries and leading EDA tools. The IP ecosystem and manufacturing solutions are in place for design starts with ARM and IBM libraries on IBM 45nm SOI technology.